1. In general
LivionKey30, LivionKey30 Outdoor, LivionKey20 and LivionKeyOne have internal accelerometer which detects if device moves. When movement is detected, photos and videos are taken and sent to server (except LivionKeyOne). The antitheft alarm (Device moved) will also activate, if it's configured in use.
This feature has been developed for security reasons: if somebody does vandalism or tries to break in to the device, the system can automatically send alarms of that and the person will be captured on photos and videos.
It's possible to adjust the sensitivity of the alarm with 5 different levels. By default the alarm will not activate from small movements of the device (for example vibrations caused by slammed door nearby).
2. How to configure antitheft alarm?
2.1 First-Generation Dashboard
Navigate to Settings -> Preferences view
Set the desired sensitivity from Antitheft sensitivity -drop-down menu.
There are 5 sensitivity levels:
Very low
Low
Normal (default)
High
Very high
Note!
It's firmly recommended to set the sensitivity level "Very high" at first. If it seems that there are false alarms e.g. due to vibrating wall, you can then adjust the setting to less sensitive.
Once you have selected the desired level, click Save. After that the device needs to be restarted in order to take the setting in use.
If you want to have antitheft alarm to email, navigate to Settings -> Alarm settings -view, add "Device moved" -alarm for alarm receivers and click Save.
2.2 Next-Generation Dashboard
Navigate to Key Automats -view and click the desired device from the list
Open the menu from top-right (3-dot symbol) and select Settings
Click UPDATE from Other settings -section. Set the desired sensitivity from Antitheft sensitivity -drop-down menu and click Save.
There are 5 sensitivity levels:
Very low
Low
Normal (default)
High
Very high
Note!
It's firmly recommended to set the sensitivity level "Very high" at first. If it seems that there are false alarms e.g. due to vibrating wall, you can then adjust the setting to less sensitive.
If you want that system sends antitheft alarms to recipients, navigate to Organization -> Notifications -view.
Click UPDATE from Key automat alarms -section. Define the recipient and select Movement -alarm for it. Click Save to save the changes.
3. How to view photos and videos of the device movement?
3.1 First-Generation Dashboard
Navigate to Logs -view. Click Follow link from desired Device moved -event.
3.2 Next-Generation Dashboard
Navigate to Event history -view
Click the desired Key automat is moving -event. The timeline with photo and videos will open to right side of the view.